On Track Range

The Flash

Product DescriptionProduct SpecificationTechnical Information
Simple yet sophisticated, short 3D printed cylinder head featuring the amazing details of the aluminum heatsink. All ‘On Track’ products come standard with a 90+ CRI module to enhance an objects appearance. Choice of four light distributions, allows for various sized focal points to showcase any sized display. Maintain an even distribution of light throughout your application by applying up to 10 lights per power supply. Controlled via DC String. Low voltage track enables for safe and easy in house adjustments. Capable of rotating up to 350° with a 90° tilt angle, allowing the client to position the focal point towards any desired display within the room’s internal design.
  • 3D printed housing with a textured finish
  • LED Colour options: 2700K / 3000K / 4000K
  • Housing Colours available in Black and White
  • LED 90+ CRI as standard
  • 2 metre length, 3 wire single circuit track complete with dead ends
  • O – 90° tilt axis, rotatable 350°, internal wiring
  • Dali Dimming to 5% as standard
  • DC String: Control via 48V DC power lines
  • Limelite sensor available on request
  • Luminaire lifetime L80/B10 >51,000hours
  • MacAdams 3 SDCM
  • Australian made, designed and manufactured

Click image to activate 3D viewer

Customise your light fitting

Select Light Distribution

Flood
Flood
Wide beam angle
Medium
Medium
Narrow beam angle
Spot
Spot
Very narrow beam angle
Oval
Oval
Attaches to spot to spread light in an oval distribution

Select LED Colour


2.7K
Extra Warm White

3K
Warm White

4K
Cool White

Select Housing Colour


Black

White

The Flash

The Jet

Product DescriptionProduct SpecificationTechnical Information
A dynamic small factor form, inspired by the beautiful lines of a jet engine. Heat sink thrusts from the body in response to its inspiration. All ‘On Track’ products come standard with a 90+ CRI module to enhance an objects appearance. Choice of four light distributions, allows for various sized focal points to showcase any sized display. Maintain an even distribution of light throughout your application by applying up to 10 lights per power supply. Controlled via DC String. Low voltage track enables for safe and easy in house adjustments. Capable of rotating up to 350° with a 90° tilt angle, allowing the client to position the focal point towards any desired display within the room’s internal design.
  • 3D printed housing with a textured finish
  • LED Colour options: 2700K / 3000K / 4000K
  • Housing Colours available in Black and White
  • LED 90+ CRI as standard
  • 2 metre length, 3 wire single circuit track complete with dead ends
  • O – 90° tilt axis, rotatable 350°, internal wiring
  • Dali Dimming to 5% as standard
  • DC String: Control via 48V DC power lines
  • Limelite sensor available on request
  • Luminaire lifetime L80/B10 >51,000hours
  • MacAdams 3 SDCM
  • Australian made, designed and manufactured

Click image to activate 3D viewer

Customise your light fitting

Select Light Distribution

Flood
Flood
Wide beam angle
Medium
Medium
Narrow beam angle
Spot
Spot
Very narrow beam angle
Oval
Oval
Attaches to spot to spread light in an oval distribution

Select LED Colour


2.7K
Extra Warm White

3K
Warm White

4K
Cool White

Select Housing Colour


Black

White

The Jet

Disco

Product DescriptionProduct SpecificationTechnical Information
A playful, large format design that is a strong statement lighting feature. Complexity in form taking full advantage of 3D printing technology. All ‘On Track’ products come standard with a 90+ CRI module to enhance an objects appearance. Choice of four light distributions, allows for various sized focal points to showcase any sized display. Maintain an even distribution of light throughout your application by applying up to 10 lights per power supply. Controlled via DC String. Low voltage track enables for safe and easy in house adjustments. Capable of rotating up to 350° with a 90° tilt angle, allowing the client to position the focal point towards any desired display within the room’s internal design.
  • 3D printed housing with a textured finish
  • LED Colour options: 2700K / 3000K / 4000K
  • Housing Colours available in Black and White
  • LED 90+ CRI as standard
  • 2 metre length, 3 wire single circuit track complete with dead ends
  • O – 90° tilt axis, rotatable 350°, internal wiring
  • Dali Dimming to 5% as standard
  • DC String: Control via 48V DC power lines
  • Limelite sensor available on request
  • Luminaire lifetime L80/B10 >51,000hours
  • MacAdams 3 SDCM
  • Australian made, designed and manufactured

Click image to activate 3D viewer

Customise your light fitting

Select Light Distribution

Flood
Flood
Wide beam angle
Medium
Medium
Narrow beam angle
Spot
Spot
Very narrow beam angle
Oval
Oval
Attaches to spot to spread light in an oval distribution

Select LED Colour


2.7K
Extra Warm White

3K
Warm White

4K
Cool White

Select Housing Colour


Black

White

Disco

Elegance

Product DescriptionProduct SpecificationTechnical Information
The essence of simple sophistication. An elegant form that settles gently into any room. Unique profile cut, the heat sink follows the curvature of the body. All ‘On Track’ products come standard with a 90+ CRI module to enhance an objects appearance. Choice of four light distributions, allows for various sized focal points to showcase any sized display. Maintain an even distribution of light throughout your application by applying up to 10 lights per power supply. Controlled via DC String. Low voltage track enables for safe and easy in house adjustments. Capable of rotating up to 350° with a 90° tilt angle, allowing the client to position the focal point towards any desired display within the room’s internal design.
  • 3D printed housing with a textured finish
  • LED Colour options: 2700K / 3000K / 4000K
  • Housing Colours available in Black and White
  • LED 90+ CRI as standard
  • 2 metre length, 3 wire single circuit track complete with dead ends
  • O – 90° tilt axis, rotatable 350°, internal wiring
  • Dali Dimming to 5% as standard
  • DC String: Control via 48V DC power lines
  • Limelite sensor available on request
  • Luminaire lifetime L80/B10 >51,000hours
  • MacAdams 3 SDCM
  • Australian made, designed and manufactured

Click image to activate 3D viewer

Product Video


Customise your light fitting

Select Light Distribution

Flood
Flood
Wide beam angle
Medium
Medium
Narrow beam angle
Spot
Spot
Very narrow beam angle
Oval
Oval
Attaches to spot to spread light in an oval distribution

Select LED Colour


2.7K
Extra Warm White

3K
Warm White

4K
Cool White

Select Housing Colour

Black

White

Elegance

The Lantern

Product DescriptionProduct SpecificationTechnical Information
A delicate form that can sit well into any environment with a sophisticated edge. A form only achievable by the means of 3D printing. All ‘On Track’ products come standard with a 90+ CRI module to enhance an objects appearance. Choice of four light distributions, allows for various sized focal points to showcase any sized display. Maintain an even distribution of light throughout your application by applying up to 10 lights per power supply. Controlled via DC String. Low voltage track enables for safe and easy in house adjustments. Capable of rotating up to 350° with a 90° tilt angle, allowing the client to position the focal point towards any desired display within the room’s internal design.
  • 3D printed housing with a textured finish
  • LED Colour options: 2700K / 3000K / 4000K
  • Housing Colours available in Black and White
  • LED 90+ CRI as standard
  • 2 metre length, 3 wire single circuit track complete with dead ends
  • O – 90° tilt axis, rotatable 350°, internal wiring
  • Dali Dimming to 5% as standard
  • DC String: Control via 48V DC power lines
  • Limelite sensor available on request
  • Luminaire lifetime L80/B10 >51,000hours
  • MacAdams 3 SDCM
  • Australian made, designed and manufactured

Click image to activate 3D viewer

Customise your light fitting

Select Light Distribution

Flood
Flood
Wide beam angle
Medium
Medium
Narrow beam angle
Spot
Spot
Very narrow beam angle
Oval
Oval
Attaches to spot to spread light in an oval distribution

Select LED Colour


2.7K
Extra Warm White

3K
Warm White

4K
Cool White

Select Housing Colour


Black

White

The Lantern

The Petal

Product DescriptionProduct SpecificationTechnical Information
Reminiscent of the delicate lines found in our flora, the Petal is a statement piece that holds its own presence. The duality of the contrasting faces highlights its distinct design qualities. All ‘On Track’ products come standard with a 90+ CRI module to enhance an objects appearance. Choice of four light distributions, allows for various sized focal points to showcase any sized display. Maintain an even distribution of light throughout your application by applying up to 10 lights per power supply. Controlled via DC String. Low voltage track enables for safe and easy in house adjustments. Capable of rotating up to 350° with a 90° tilt angle, allowing the client to position the focal point towards any desired display within the room’s internal design.
  • 3D printed housing with a textured finish
  • LED Colour options: 2700K / 3000K / 4000K
  • Housing Colours available in Black and White
  • LED 90+ CRI as standard
  • 2 metre length, 3 wire single circuit track complete with dead ends
  • O – 90° tilt axis, rotatable 350°, internal wiring
  • Dali Dimming to 5% as standard
  • DC String: Control via 48V DC power lines
  • Limelite sensor available on request
  • Luminaire lifetime L80/B10 >51,000hours
  • MacAdams 3 SDCM
  • Australian made, designed and manufactured

Click image to activate 3D viewer

Customise your light fitting

Select Light Distribution

Flood
Flood
Wide beam angle
Medium
Medium
Narrow beam angle
Spot
Spot
Very narrow beam angle
Oval
Oval
Attaches to spot to spread light in an oval distribution

Select LED Colour


2.7K
Extra Warm White

3K
Warm White

4K
Cool White

Select Housing Colour


Black

White

Select Insert Face Colour


Black
Insert Face

White
Insert Face

Recommended: Alternate Insert Face colour to housing colour

The Petal

Part Number: OT-----12w----

  • Wide beam angle using a Flood reflector
  • LED 12W 1346Lm - 90+ CRI
  • Luminaire efficacy: 112.16Lm/w
  • Luminous flux: 1346 Lumens
  • Housing colour: -
  • Luminaire lifetime: L80/B10 51,000hours
  • MacAdam 3 SDCM
Australian MadeAll LimeLite products are Australian designed, Australian made and Australian owned.
Technical DataThe Limelite range is supported by Technical Data and Photometrics.
LED LightLight Emitting Diode Luminaire. LimeLite only uses Zhaga endorsed LED boards. We give a 5 year guarantee on our LEDs.
RCM CompliantRegulatory Compliance Mark. LimeLite products meet the Strict Testing requirements for Regulatory compliance.
Dimming SwitchA Push Dim Switch with wiring instructions, where a simple Dimming Switch action is required.
90+CRI90+ Colour Rendering Index. 90+CRI luminaires Enhance the Colours in the surrounding area.
Earthquake ResistantLimeLite luminaires are Earthquake Resistant.
Small Carbon FootprintReducing Carbon Foot Print by locally making our product and embracing High Efficient Technology.
Illuminance at a distance
  • Narrow beam angle using a Medium reflector
  • LED 12W 1374Lm - 90+ CRI
  • Luminaire efficacy: 114.50Lm/w
  • Luminous flux: 1374 Lumens
  • Housing colour: -
  • Luminaire lifetime: L80/B10 51,000hours
  • MacAdam 3 SDCM
Australian MadeAll LimeLite products are Australian designed, Australian made and Australian owned.
Technical DataThe Limelite range is supported by Technical Data and Photometrics.
LED LightLight Emitting Diode Luminaire. LimeLite only uses Zhaga endorsed LED boards. We give a 5 year guarantee on our LEDs.
RCM CompliantRegulatory Compliance Mark. LimeLite products meet the Strict Testing requirements for Regulatory compliance.
Dimming SwitchA Push Dim Switch with wiring instructions, where a simple Dimming Switch action is required.
90+CRI90+ Colour Rendering Index. 90+CRI luminaires Enhance the Colours in the surrounding area.
Earthquake ResistantLimeLite luminaires are Earthquake Resistant.
Small Carbon FootprintReducing Carbon Foot Print by locally making our product and embracing High Efficient Technology.
Illuminance at a distance
  • Very narrow beam angle using a Spot reflector
  • LED 12W 1353Lm - 90+ CRI
  • Luminaire efficacy: 112.75Lm/w
  • Luminous flux: 1353 Lumens
  • Housing colour: -
  • Luminaire lifetime: L80/B10 51,000hours
  • MacAdam 3 SDCM
Australian MadeAll LimeLite products are Australian designed, Australian made and Australian owned.
Technical DataThe Limelite range is supported by Technical Data and Photometrics.
LED LightLight Emitting Diode Luminaire. LimeLite only uses Zhaga endorsed LED boards. We give a 5 year guarantee on our LEDs.
RCM CompliantRegulatory Compliance Mark. LimeLite products meet the Strict Testing requirements for Regulatory compliance.
Dimming SwitchA Push Dim Switch with wiring instructions, where a simple Dimming Switch action is required.
90+CRI90+ Colour Rendering Index. 90+CRI luminaires Enhance the Colours in the surrounding area.
Earthquake ResistantLimeLite luminaires are Earthquake Resistant.
Small Carbon FootprintReducing Carbon Foot Print by locally making our product and embracing High Efficient Technology.
Illuminance at a distance
  • Nice even spread of light using the Oval attachment on the Spot reflector
  • LED 12W 1201Lm - 90+ CRI
  • Luminaire efficacy: 100.08Lm/w
  • Luminous flux: 1201 Lumens
  • Housing colour: -
  • Luminaire lifetime: L80/B10 51,000hours
  • MacAdam 3 SDCM
Australian MadeAll LimeLite products are Australian designed, Australian made and Australian owned.
Technical DataThe Limelite range is supported by Technical Data and Photometrics.
LED LightLight Emitting Diode Luminaire. LimeLite only uses Zhaga endorsed LED boards. We give a 5 year guarantee on our LEDs.
RCM CompliantRegulatory Compliance Mark. LimeLite products meet the Strict Testing requirements for Regulatory compliance.
Dimming SwitchA Push Dim Switch with wiring instructions, where a simple Dimming Switch action is required.
90+CRI90+ Colour Rendering Index. 90+CRI luminaires Enhance the Colours in the surrounding area.
Earthquake ResistantLimeLite luminaires are Earthquake Resistant.
Small Carbon FootprintReducing Carbon Foot Print by locally making our product and embracing High Efficient Technology.
Illuminance at a distance